WHY A 1st CLASS BLADE
METALLURGICAL STRUCTURE & CARBIDE DISPERSION
Uniform & slow blade wear depend on:
- Pure chemical composition
- Small size of carbides
- High density (no porosity)
- Lack of non metallic inclusions
- Fine carbide dispersion through steel section
- Undifferentiated metallurgical structure
STRAIGHTNESS
Strict straightness tolerance:
- perfect parallelism blade-cylinder
- low working pressure
- uniform blade wear all through its length
- long blade lasting
- TOP quality carbon Swedish steel
- SELECTED refined chemical composition
- HIGH CONSISTENCY carbide dispersion
- STRICTEST tolerances
| RED LABEL printing doctor blades (High carbon steel) | |
| Surface: | bright polished |
| Tensile strength: | 1960 ± 100 N/mm² (580 Hv) |
| Straightness maximum deviation: | 1,0/3000 mm |
| Flatness maximum deviation: | 0,3% across the strip width |
| Width tolerance (blade): | ± 0,10 mm if blade width < 50 mm |
| ± 0,15 mm if blade width ≥ 50 mm | |
| Thickness tolerance (blade): | ± 0,009 mm if blade thickness ≤ 0,152 mm |
| ± 0,011 mm if blade thickness > 0,152 mm | |
| Width tolerance (lamella): | ± 0,025 mm |
| Thickness tolerance (lamella): | ± 0,003 mm |
| Contact edge roughness: | Ra 0,10 ± 0,05 μm |
- EXTRA FINE carbon Swedish steel
- SPECIAL metallurgical structure
- UNIFORM & MINIMAL carbide size
- EXTREMELY PURE chemical composition
| BLUE LABEL printing doctor blades (Extra refined high carbon steel) | |
| Surface: | bright polished |
| Tensile strength: | 1960 ± 100 N/mm² (580 Hv) |
| Straightness maximum deviation: | 0,6/3000 mm |
| Flatness maximum deviation: | 0,3% across the strip width |
| Width tolerance (blade): | ± 0,10 mm if blade width < 50 mm |
| ± 0,15 mm if blade width ≥ 50 mm | |
| Thickness tolerance (blade): | ± 0,009 mm if blade thickness ≤ 0,152 mm |
| ± 0,011 mm if blade thickness > 0,152 mm | |
| Width tolerance (lamella): | ± 0,025 mm |
| Thickness tolerance (lamella): | ± 0,003 mm |
| Contact edge roughness: | Ra 0,10 ± 0,05 μm |
- NEW high carbon alloyed Swedish steel
- SUPER REFINED structure for the most uniform wear
- INNOVATIVE hardening & tempering process for an increased wear abrasion resistance
- IMPROVED doctoring precision and superior lasting
| BLACK LABEL printing doctor blades (High carbon Cr alloyed steel) | |
| Surface: | bright polished |
| Tensile Strength: | 2060 ± 100 N/mm² (605 Hv) |
| Straightness maximum deviation: | 1,0/3000 mm |
| Flatness maximum deviation: | 0,3% across the strip width |
| Width tolerance (blade): | ± 0,10 mm if blade width < 50 mm |
| ± 0,15 mm if blade width ≥ 50 mm | |
| Thickness tolerance (blade): | ± 0,009 mm if blade thickness ≤ 0,152 mm |
| ± 0,011 mm if blade thickness > 0,152 mm | |
| Width tolerance (lamella): | ± 0,025 mm |
| Thickness tolerance (lamella): | ± 0,003 mm |
| Contact edge roughness: | Ra 0,10 ± 0,05 μm |
- LONG LIFE micro alloyed high density Swedish steel
- UNIQUE chemical composition
- HIGHEST wear resistance
- IDEAL for long runsand very abrasive inks
| GOLD LABEL printing doctor blades (Micro alloyed steel) | |
| Surface: | yellow polished |
| Tensile strength: | 2100 ± 100 N/mm² (615 Hv) |
| Straightness maximum deviation: | 1,3/3000 mm |
| Flatness maximum deviation: | 0,3% across the strip width |
| Width tolerance (blade): | ± 0,10 mm if blade width < 50 mm |
| ± 0,15 mm if blade width ≥ 50 mm | |
| Thickness tolerance (blade): | ± 0,009 mm if blade thickness ≤ 0,152 mm |
| ± 0,011 mm if blade thickness > 0,152 mm | |
| Width tolerance (lamella): | ± 0,025 mm |
| Thickness tolerance (lamella): | ± 0,003 mm |
| Contact edge roughness: | Ra 0,10 ± 0,05 μm |
- STAINLESS extra fine Swedish steel
- TOTAL oxydation and corrosion protection
- HIGH wear resistance
- PERFECT for water based inks and to solve rust problems
| SILVER LABEL printing doctor blades (Stainless steel) | |
| Surface: | bright polished |
| Tensile strength: | 1910 ± 100 N/mm² (565 Hv) |
| Straightness maximum deviation: | 1,1/3000 mm |
| Flatness maximum deviation: | 0,3% across the strip width |
| Width tolerance (blade): | ± 0,10 mm if blade width < 50 mm |
| ± 0,15 mm if blade width ≥ 50 mm | |
| Thickness tolerance (blade): | ± 0,009 mm if blade thickness ≤ 0,152 mm |
| ± 0,011 mm if blade thickness > 0,152 mm | |
| Width tolerance (lamella): | ± 0,025 mm |
| Thickness tolerance (lamella): | ± 0,003 mm |
| Contact edge roughness: | Ra 0,10 ± 0,05 μm |
- PLASTIC & COMPOSITE with medium & high density
- OPTIMAL flexibility and adaptability
- GOOD wear resistance at medium working speed
- SPECIFIC for corrugated printing with water based inks